Table of Contents
Advertisement
[2 MEDIA FUNC.]
You can set the relay recording and backup recording.
HC-MDH2
≥ Insert SD cards to card slot 1 and card slot 2.
HC-MDH2M
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Insert SD cards to card slot.
: [RECORD SETUP] # [2 MEDIA FUNC.] # desired setting
MENU
[OFF]:
[RELAY]:
[BACKUP]:
∫ Relay recording
HC-MDH2
It is possible to continuously record on the SD card in the other card slot even when the available
capacity of the SD card runs out during the recording.
HC-MDH2M
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
is displayed on the media to record the motion picture.
≥
media is switched and the relay recording is started.
≥ Relay Recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the external drive.
≥ If [DELETE RELAY SCENE] or [RELAY INFO CANCEL] is performed after [RELAY SCENE
COMBINE] is performed, Relay Recording will be available again. If [RELAY SCENE COMBINE]
is not performed and [RELAY] in [2 MEDIA FUNC.] is selected, a message will be displayed. You
will be able to perform Relay Recording by selecting [YES] and press the button in the centre, but
you will not be able to perform the [RELAY SCENE COMBINE] after that.
≥ If an SD card containing the first portion of a relay-recorded scene is inserted into a card slot
when [RELAY] is set, a message confirming whether to cancel the relay information is displayed.
Selecting [YES] will cancel the relay information from the scene, while selecting [NO] will set
[RELAY] to [OFF].
Cancel the setting.
Set the relay recording.
Set the backup recording.
(l
87)
(l
26)
will disappear when the recording
- 55 -
Advertisement
Table of Contents
