Table of Contents
Advertisement
[SELECT OPERATION ICONS]
You can change the operation icons
Register 4 favourite operation icons.
≥ The default settings are,
for Motion Picture Recording Mode, and
(Level Gauge) and
1
Select
SELECT OPERATION ICONS
[
2
Select the operation icon you would like to change to cancel the setting.
3
Select the operation icon to be set.
≥ To cancel, select the operation icon again.
4
Select [ENTER] and press the button in the centre.
[ZEBRA]
Selects the brightness level of the left-leaning zebra patterns on the screen.
[ON]/[OFF]
[MARKER]
Displaying of the luminance level display marker can be switched.
[ON]/[OFF]
[FADE]
When you start recording, the image/audio gradually appears. (Fade in)
When you pause recording, the image/audio gradually disappears. (Fade out)
Please refer to page 45.
[ON]/[OFF]
[FADE COLOUR]
You can select the colour for fade in/out.
[WHITE]/[BLACK]
[GUIDE LINES]
You can check if the image is level while recording or playing back motion pictures and still pictures.
The function can also be used to estimate the balance of the composition.
[OFF]/
/
/
(l
44) to display on the screen.
(Focus Assist),
(Menu) for Still Picture Recording Mode.
(l
45)
- 107 -
(DRS),
(Level Gauge) and
(Focus Assist),
and press the button in the centre.
]
(l
(Intelligent Exposure),
(l
47)
47)
(l
46)
(Menu)
Advertisement
Table of Contents
