Chapter 13 Connectors; Headphone; Audio In/Out; Smart Recording - Kurzweil MP120A User Manual

1. Headphone

The headphone jack is located on the bottom left of keyboard.
You will need a 1/4-inch stereo jack in order to use headphones and can use two
headphones simultaneously. To avoid the risk of hearing loss when using headphones,
please do not play the piano with a high volume level for a long time.
2. Audio In
Connect the audio output of an MP3/CD player or other audio Source to the stereo
AUX IN jack on the rear panel. You will be able to hear the music through the speaker
of your keyboard.
3. Audio Out
Audio Out ports can be used to transmit the audio signal of the piano to a keyboard
amplifier, stereo sound system, mixing console or tape recorder. When you connect
an audio speaker, please ensure that the volume has been set to the minimum level.
IN/OUT
4. Smart Recording(I/O)
Connect the Smart Recording cable to the Smart I/O port on
the right panel of your keyboard, then connect the cable with
your smartphone. Now you can record the piano sound on
your smartphone with the recording function. When you play
the contents of your smartphone, you can hear them through
the amp of MP120A.
NOTE
When you connect the Smart Recording cable, please ensure that the volume is set
to the minimum level or is turned off because noise can suddenly be produced.
The recorded volume can be different depending on the model of your device.
Thus, it is recommended to set the volume in the 12 o'clock position.
The bottom of your piano
Stereo headphone jack
C
USB MI
MIDI
VOL IN
INPUT OUTPUT
Connectors
Chapter13
OWER
DC IN 24V
25
Connectors