Canon optura300 Instruction Manual page 40

3. Connect the STV-250N Stereo Video Cable to the camcorder's AV
terminal and the audio terminals of the TV/VCR.
Connect the white plug to the white AUDIO terminal L (left), and the red plug to the
red AUDIO terminal R (right). Do not connect the yellow plug.
4. If connecting to a
TV~
set the input selector to VIDEO. If connecting to a
VCR, set the input
s~lector
to LINE.
Refer also to the lV or VCR instruction manual.
-
Signal flow
c::::>
STV-250N Stereo Video Cable
(supplied)
VIDEO
.--IllJllIllWWiE!I::)'" •
I
AUDIO
-r • • . • . • . • .
> JL
'-...mllllll1IIIIIIi!I!IIII. . . .
R
40
1. Turn off all devices before starting the connections.
2. Connect the STV-250N Stereo Video Cable to the camcorder's AV
terminal and the audio/video terminals on the TV/VCR.
Connect the white plug to the white audio terminal L (left), the red plug to the red
audio terminal R (right) and the yellow plug to the yellow video terminal VIDEO.
3. If connecting to a T\I, set the input selector to VIDEO. If connecting to a
VCR, set the input selector to LINE.