Canon optura300 Instruction Manual page 319

II
1.
2.
o
Before installing the driver following the procedure below, install the DV
Network Software first to copy the driver files to the computer.
o
Close any programs that are running before installing the driver.
o
Do not turn off the camcorder until the driver installation is complete. And
do not interrupt the installation.
o
Users of Windows XP Professional must first log in as an Administrator to
install programs.
Connect the power adapter to the camcorder.
Set the camcorder to NETWORK or CARD PLAY (VCR) mode.
(Camcorder without NETWORK mode: Set the camcorder to
CARD PLAY (VCR) mode.)
.............................................................................................
3.
Connect the camcorder to the computer using the DV cable
(CO 22).
• The driver installation starts automatically.
• Depending on the setting of your computer, a video editing program may
start. In such case, close this program.
• If the installation is complete, the Scanner and Camera Wizard or a dialog
for selecting an application appears. Click [Cancel] to close the dialog.
4.
5.
Restart the computer.
Check if the driver has been installed correctly.
From the [start] menu, select [My
Computer] and check if the [Canon
Camera Storage Device] icon
appears. If the icon does not appear,
the installation has not been '
completed properly. Uninstall and
reinstall the driver.
19