Canon optura300 Instruction Manual page 110

Selecting the Drive Mode
You can choose between three drive modes (recording modes).
Continuous Captures a quick series of still images while you press the
PHOTO button.
AEB (Auto Exposure
Bracketing)
Captures a still image in three different exposures just by
pressing the PHOTO button once.
Single
Records a single still image when you press the PHOTO
button.
You can capture a quick series of still images with the continuous shooting function.
~~~~
I
CAMERA SET UP
I~I
DR I VE MODE .. • SINGLE
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [CONT.
~]
and close the menu.
11
~
11
appears on the screen.
3. Press and hold the PHOTO button to record the still images.
A series of still images will be recorded.
4. Release the PHOTO button to end recording.
Still Image Size Built-in flash
Frames per
Maximum Number
Second
of Continuous Shots
1632 x 1224 Flash ON/OFF
2 frames
10 images
1280 x 960 Flash OFF
3 frames
10 images
Flash ON 2 frames
10 images
640
x
480
Flash OFF 3 frames
30 images
Flash ON 2 frames 30 images
*
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when card is full.
a
The range of the built-in flash decreases in continuous shooting mode. We
recommend recording close to the subject when using the flash.
_ a
Maximum number of continuous shots at one time:
ill
-
110