Canon optura300 Instruction Manual page 156

Memory Card Operation
Problem Cause Solution
CO
Memory card cannot be
Memory card was not facing Turn the memory card over 100
inserted.
the correct direction. and reinsert it.
Memory card cannot be
Memory card is full. Replace the memory card or 120
recorded. erase images.
Memory card is not Format the memory card.
129
formatted.
Memory card is not inserted. Insert a memory card.
100
File number reached
Set [FILE NUMBERS] to
102
maximum value. [RESET] and insert a new
memory card.
SD Memory Card is Change the position of the
100
protected. protect switch.
Memory card cannot be Camcorder is not set to Set the camcorder to CARD
116
played back.
CARD PLAY (VCR) mode. PLAY (VCR) mode.
Memory card is not inserted. Insert a memory card. 100
Camcorder does not The camcorder displays the
Press the CARD STILUMOVIE 116
display movies in CARD still image playback mode. button to switch to MPEG-4
PLAY (VCR) mode. movie playback.
The movie was recorded in Motion JPEG movies are 116
Motion JPEG format with
displayed in still image
another camcorder. playback mode. Press the
CARD STI LUMOVI E button
to switch to still image
playback.
Image cannot be erased.
Image is protected. Cancel the protection. 119
SO memory card is Change the position of the
100
protected.
protect switch.
~
flashes red.
Card error occurred. Turn off the camcorder. 129
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
Printing
-
156
The printer is not
operating even though
camcorder and printer
are correctly connected.
The camcorder is set to
NETWORK mode.
1. Set the camcorder to
CARD PLAY (VCR) mode.
2. Disconnect and reconnect
the USB cable.
3. Turn off the printer and
turn it back on.