Canon optura300 Instruction Manual page 105

3. Press the PHOTO button fully.
• 0 and focusing frame disappear and you hear a shutter sound.
• The card access indicator flashes and the card access display
appears.
• The still image shown on the screen will be recorded on the memory card.
a
To use the self-timer (CD 71), press the
~
(self-timer) button before step 2
and press the PHOTO button fully.
a
When the subject is too bright (overexposed), the ND filter turns on
automatically
( I I
ND
II
appears on the screen). If it is still too bright,
II
OVEREXp lI
starts flashing. In such case, use the optional FS-30.5U ND filter. If you 'wish to
turn off the ND filter: Open the menu and select [CAMERA SET UP]. Select
[ND], set it to [OFF] and close the menu.
a
1I0VEREXp
II
does not appear when you lock the exposure with the EXP button.
a
When the Focus-Priority mode is set to [ON]:
If the subject is not suitable for autofocus, the focusing frame turns yellow and
locks the focus. The confirmation sound beeps once. Adjust the focus manually
with the selector dial.
a
When the Focus-Priority mode is set to [OFF]:
No focusing frame appears.
In step 2,
0
turns green, and focus and exposure are locked.
Recording Still Images on a Memory Card While Recording
You can record still images on a memory card by pressing the PHOTO button while
you are recording a movie on the tape.
a
The size of the still image will be 640
x
480.
a
The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
a
Card mix and 16:9 mode cannot be used when [PHOTO REC] is set to [CARD
CQ].
a
The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
a
The beep does not sound when you press the PHOTO button while recording a
movie on the tape.
-
c
'"
5'
tC
OJ
s:
tD
3
o
~
n
OJ
a.
105