NETGEAR FWG114P Reference Manual page 90

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Set up the Netgear printer port driver.
Click Finish when the Installation
a.
Wizard is done.
The Printer Port Setup utility displays,
and queries the network to locate the
print server in the FWG114P.
After a short delay, the Printer Port Setup
utility will display the port it finds in the
FWG114P print server.
Click Add to add this printer port to your
b.
computer.
The Printer Port Setup utility will report
that Port FWG114P_P1 has been added
to the computer.
Click Exit to exit the Printer Port Setup
c.
utility.
The Windows Add Printer Wizard
automatically runs.
7-6
Netgear Printer Port Installation Wizard
Note: Under Windows95, you may receive
an error message stating that
SETUPAPI.DLL was not found. In this case,
you should upgrade your Internet Explorer to
version 5 or later.
December 2003, M-10177-01
Netgear Printer Port Setup Utility
Print Server