Configuring Lan-To-Lan Settings; Basic Requirements For Lan-To-Lan Connections; How To Configure Lan-To-Lan Connections - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

Configuring LAN-to-LAN Settings

LAN-to-LAN enables direct communications between two FWG114P wireless firewall/print
servers.
FWG114P A
192.168.3.1
Figure 5-4: LAN-to-LAN network configuration

Basic Requirements for LAN-to-LAN Connections

Serial port LAN-to-LAN configurations require these elements:
An ISDN or analog phone line with an active ISDN or dial-up ISP account.
1.
A serial modem properly configured and attached to the DB9 connector on the serial port.
2.
A broadband connection to one FWG114P for LAN-to-LAN auto-rollover Internet access.
3.
The LAN-to-LAN settings configured and applied to the two FWG114P wireless firewall/print
4.
servers.

How to Configure LAN-to-LAN Connections

Follow the steps below to configure a serial port LAN-to-LAN connection.
Configure a serial port modem according to the instructions above.
1.
From the main menu, click LAN-to-LAN in the Serial Port section.
2.
5-6
December 2003, M-10177-01M-10207-01, Reference Manual v2
Serial Connection
FWG114P B
192.168.0.1
Serial Port Configuration