NETGEAR FWG114P Reference Manual page 31

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Connect the Ethernet cable from the broadband modem to the FWG114P Internet port (A).
c.
MODEM
FWG114P ProSafe 802.11g
Wireless Firewall/Print Server
Figure 3-2: Connect the broadband modem to the router
Connect the Ethernet cable that came with the router from a Local port on the router (B) to
d.
your computer.
Figure 3-3: Connect the computers on your network to the router
Note: The FWG114P incorporates Auto Uplink
will automatically sense if the cable should have a normal connection or an uplink
connection. This feature eliminates the need to worry about crossover cables because Auto
Uplink will make the right connection for either type of cable.
Now, turn on your computer. If software usually logs you in to your Internet connection,
e.
do not run that software or cancel it if it starts automatically.
Connecting the FWG114P to the Internet
A
LO CA L
USB 10/100M
4 3 2 1
IN TER N ET
12VDC, 1.0A
Broadband modem
FWG114P ProSafe 802.11g
Wireless Firewall/Print Server
USB
4
MODEM
B
Broadband modem
December 2003, M-10177-01
LO CA L
10/100M
3 2 1
IN TER N ET
12VDC, 1.0A
TM technology. Each LOCAL Ethernet port
3-5