NETGEAR FWG114P Reference Manual page 88

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Identify the printer connected to FWG114P
USB printer port.
From the Install Printer Software screen
a.
selection lists, find the manufacturer and
model of the printer you connected to the
USB port on the FWG114P.
Click Next to proceed.
If the printer software is already installed
on this computer, the Add Printer Wizard
will inform you and let you keep the
existing driver.
The Name Your Printer screen prompts
b.
for a descriptive name and if you want it
to be the default. Enter your choices.
Click Next to proceed.
On the Printer Sharing screen, accept the
c.
"Do not share this printer" option and
click Next to proceed.
Print a test page to verify successful printing on your network.
Upon completion of the Add Printer Wizard, you will be prompted to print a test page.
a.
Check the printer attached to the FWG114P to see that the test page printed successfully
b.
If you are unable to print a test page, see
Note: If two long files are sent to the printer at once, Windows will pop up a print failure
error message. This message can be ignored. The file will print once the printer finished
printing the first file.
7-4
Add Printer Wizard Install Printer Software page
If you do not see your make and model
printer in the lists, and you are connected to
the Internet, you can click the Windows
Update button to download additional printer
software from the Microsoft Web site, or you
can click the Have Disk button to install the
printer software from a disk you have.
"Troubleshooting the Print Server" on page
December 2003, M-10177-01
-11.
Print Server