Getting Started; Location; Setting Up; Bt Converse 1400 – Edition 4 – 22.12 - BT Converse 1400 User Manual

Getting started

Setting up

Connect the mains power supply and line cords
1. Plug the lead of the mains power cable into the POWER
socket on the underside of the phone and route the cable
as shown.
2. Plug the telephone line cords into the sockets marked
LINE 1 and LINE 2 on the underside of the phone and
route the cables as shown.
Optional
3. Your BT Converse 1400 is designed to run from a
power supply or batteries. Batteries are not supplied
with the unit, but if you want to fit them follow the
instructions on the following page.
If you are not using the power supply provided, batteries
are required for the idle display and for the message
waiting feature to work.
BT Converse 1400 – Edition 4 – 22.12.05 – 7097
POWER
LINE 1
LINE 2

Location

You need to place your BT
Converse 1400 within 3 metres
of a telephone and mains power
socket so that the cables will
reach.
Your BT Converse 1400 can be wall
mounted, see 'Wall mounting your
phone' page 34.
5