Wall Mounting Your Phone - BT Converse 1400 User Manual

Wall mounting your phone

34
IMPORTANT
Before you wall mount, please
check that:
• the wall can support the weight
of the phone
• you are not drilling into any
hidden wiring
• the telephone line cord will reach
the telephone socket
BT are not responsible for any
damage/injury caused while
attempting to wall mount
your phone.
Using the handset park when the
phone is wall-mounted
If you need to leave the phone
whilst on a call, hang the handset
on the handset park at the top
left-hand side of the base.
BT Converse 1400 – Edition 4 – 22.12.05 – 7097
1. Unclip stand from the base of the phone and remove it.
Route the cables as appropiate.
2. Drill two holes in the wall 75-80mm vertically apart using
an 8mm drill bit.
3. Insert the wall plugs if necessary then insert the screws
leaving about 5mm protruding from the wall on which to
hang the phone.
4. Rotate the handset hook 180º so that it sticks upwards.
This holds the handset in place when wall-mounted.
5. Slot the holes on the back of the base over the screw
heads and gently pull the phone down to make sure it is
securely in place.