Related Manuals for BT 120
Summary of Contents for BT 120
- Page 1 Converse 120 Userfriendly Guide...
-
Page 2: At A Glance
Thank you for making the right choice. You can expect your Converse 120 to provide many years of quality service. Please read the instructions carefully before use and keep this user guide for future reference. IMPORTANT Check that your Converse 120 is complete. -
Page 3: Making And Receiving Calls
Installing your Converse 120 Situating your Converse 120 Situate your Converse 120 close enough to a phone socket so that the cables will reach. Do not stand it on carpets or other similar surfaces that generate fibres. Your Converse 120 can be wall-mounted. - Page 4 To adjust the ringer volume RINGER VOLUME Use the RINGER VOLUME switch on the underside of your Converse 120. Set the volume switch to the setting you want: HI, LOW or OFF. The Visual ring indicator will flash when you have an incoming call with all three settings.
-
Page 5: Wall Mounting
Unclip the stand on the back of the Converse 120. Drill two holes in the wall 61mm vertically apart using an 8mm drill bit. WALL PLUG... -
Page 6: Technical Information
Your Converse 120 has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may not ring.