Polycom SoundPoint IP 650 User Manual page 45

Note Incoming calls may be ignored by pressing the Reject soft key (for private lines) or
the Silence soft key (for shared lines) or Do Not Disturb during ringing. The Do
Not Disturb mode stays active when the call is dropped and will remain so until
toggled off.
Incoming calls may be forwarded by pressing the Forward soft key. For more
information, refer to
Answering When Not in Another Call
In all cases, the active call will appear on the graphic display showing call
duration and destination.
To answer a call using the handset:
Pick up the handset.
>>
To answer a call using Hands-Free Speakerphone mode:
Do one of the following steps:
>>
— Press
— With the handset on-hook, press
incoming call (where the line status indicator is flashing green).
— Press the Answer soft key.
To answer a call using the headset:
Press
>>
If Headset Memory Mode is activated, press
Answer soft key.
Answering When in Another Call
You are busy on an active call and a second incoming call arrives on the same
phone number.
• If your phone is configured for a single Line Key per line:
— The second call will cause a call waiting tone to be played, the second
line status indicator is fast flashing green, and an incoming call icon
appears. Caller information for the incoming call appears on the
graphic display.
Using the Basic Features of Your SoundPoint IP 650 SIP Phone
Dynamic Forwarding
.
to answer the call through an optionally connected headset.
on page 3-15.
opposite the
or the
3 - 5