Configuring Basic Settings; Time And Date - Polycom SoundPoint IP 650 User Manual

User Guide SoundPoint IP 650

Configuring Basic Settings

Time and Date

2 - 2
You can configure the following basic settings through use of
• Time and date
• Display contrast
• Backlight intensity
• Headset Memory Mode
• Ring type
• Language support (localization)
You can mute the microphone and adjust the volume using separate keys.
The time and date appears on the graphic display of the SoundPoint IP 650 SIP
phone. If the phone cannot obtain a time and date from the call server, the
display will flash. Contact your system administrator if either the time or date
is incorrect.
You have control over the format of the time and date display and can turn the
display of time and date off. The default time and date format appears in the
following figure.
To configure the time and date:
1. Press Menu
2. Select Settings > Basic > Preferences > Time & Date.
3. Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.
.
Menu :