Placing A Call - Polycom SoundPoint IP 650 User Manual

User Guide SoundPoint IP 650

Placing a Call

3 - 2
To customize your phone, refer to
Phone on page 2-1. To read about the phone's advanced features, refer to
Using the Advanced Features of Your SoundPoint IP 650 SIP Phone
4-1. To add a SoundPoint IP Expansion Module to your SoundPoint IP 650
phone, refer to Using the SoundPoint IP Expansion Module
If you require additional information or assistance with your new phone,
contact your system administrator.
You can place a call in many ways using your SoundPoint IP 650 SIP phone:
• using the handset
• using the speakerphone
• using the headset
You can also dial the number first, and then choose the method you will use to
speak to the other party.
During a call, you can alternate between Handset, Headset, or Hands-Free
Speakerphone modes by pressing the
handset.
Call duration on an active call is monitored through a local call timer. This is
visible within the active call window on the graphic display. In the figure
below, the call to Greg Slowski has lasted 34 seconds so far.
Customizing Your SoundPoint IP 650 SIP
or keys, or picking up the
on page
on page 5-1.