Chapter 2 Setting The Defaults; Adding Optional Devices (Setup); Installing The Paper Feeder (Pf-60) - Kyocera Mita FS-1800/N User Manual

Chapter 2
2.1

Adding Optional Devices (Setup)

2.1.1 Installing the Paper Feeder (PF-60)

Paper Feeder
Setting the Defaults
This section explains how to set defaults on option units installed on the
printer. Setting made in this way will become effective for all application
software. To temporarily change the settings, make printer settings from
the application. See
Software.
The Setup tab enables you to setup optional devices such as paper feeders
so that the printer can recognize them. Each printer has a unique set of
options that are listed in the Available Options window. If you have
attached one or more printer options, highlight that option and click the
Add button one after another.
Check that the option paper feeder (PF-60) is installed on the printer
correctly.
1
Browse through Windows Start > Settings > Printers.
2
Right click on the Kyocera Mita FS-1800 or Kyocera Mita FS-3800
icon and then click Properties.
The Properties dialog box is displayed.
3
Click the Setup tab.
Chapter 3, Printing through Application
2-1
Setting the Defaults