Elation E Spot LED User Manual page 40

• When you get to the " Program 1" function tap the " ENTER" button. The screen will
then change to Edit Steps 01. Use the " UP" and " DOWN" buttons to toggle through
the scenes created in " Step 1." Press the " ENTER" button to add a scene to the
program. Tapping the " Enter" button will automatically lock the selected scene into
the programs' memory. Repeat the process until all the desired scenes have been
added to the program. Each program can store a maximum of 64 scenes.
• To test the program access " Program Test" in the " Program Edit" menu function.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
• Access the main menu and use the " Up" and " Down" to toggle to " Function Mode"
and tap the " Enter" button.
• In the next screen select " Auto Program" and tap the " Enter" button.
• There are now two selections, " Master" and " Alone." Select " Master" when running
multiple fixtures in a master/slave configuration. See section 10.2 " Master/ Slave
Operation" on page 36 for proper set-up instructions. Select " Alone" when running a
single fixture or when multiple fixtures in stand-alone mode. See section 10.1
" Stand-Alone Operation" on page 36 for proper set-up instructions.
©Elation Professional, Los Angeles Ca. 40
E SPOT LED™
www.ElationLighting.com