Elation E Spot LED User Manual page 27

E SPOT LED™
1. Access the main menu.
2. Tap the UP button until " MIC" is displayed and press ENTER.
3. The display will show " M-XX" (Where XX represents a value between 00 & 99).
4. Use the UP and DOWN button to adjust the mic sensitivity, 99 being the highest.
5. Press ENTER to confirm and lock your new setting in place.
6. Press MODE/ESC to return to the main menu.
11. DISPLAY MENU
- This menu function will control the various on-board display features. .
Follow the steps below to access this function:
VALU- Displays the DMX channel value
D ON- Display auto on/off command
FLIP – Display rotation
LOCK – Menu function button lock
VALU – This function will detail the DMX value of a channel in display as it is
changed by a DMX console. Follow the steps below to access this function:
1. Access the main menu.
2. Tap the UP button until " DISP" is displayed.
3. Press ENTER, the display will show " VALU" .
4. Press ENTER, once again " d-00" will be displayed.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
D ON – This function will turn the display off after the has gone two seconds
without any menu activity. . Follow the steps below to access this function:
1. Access the main menu.
2. Tap the UP button until " DISP" is displayed.
3. Press ENTER, the display will show " VALU" .
4. Tap the UP button until " D-ON" is displayed and tap the ENTER button.
Press the UP button to select " ON" to activate this function, or " OFF" to deactivate this
function. When set " OFF" , this function will turn the display off after the display has gone
©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com