Elation E Spot LED User Manual page 22

3. Tap the UP or DOWN button until " RUN" is displayed, press ENTER.
4. Tap the UP or DOWN button to select either " Master" or " Alone" and press ENTER.
5. Press MODE/ESC to return to the main menu.
AUDI
- This feature is used to run the internal preset programs in AUDIO mode in either a
Master/Slave or a stand-alone operating mode Follow the procedure below to enter the
audio menu:
1. Access the main menu.
2. Tap the UP or DOWN button until " PLAY" is displayed, press ENTER.
3. Tap the UP or DOWN button until " AUDI" is displayed, press ENTER.
4. Tap the UP or DOWN button to select either " Master" or " Alone" and press ENTER.
5. Press MODE/ESC to return to the main menu.
AUTO
– Runs the unit without any DMX signal in stand-alone mode. Follow the procedure
below to enter the auto menu:
1. Access the main me nu.
2. Tap the UP or DOWN button until " PLAY" is displayed, press ENTER.
3. Tap the UP or DOWN button until " AUTO" is displayed, press ENTER.
4. Tap the UP or DOWN button to select " CLOS" , " HOLD," " AUTO," or " AUDI" and
press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.
This function dictates how the fixture will function if it looses DMX signal during
normal operation. The default function is set to hold, in which the fixture will lock into
the last DMX signal it received and remain in that position until it is turned off or
begins receiving a new DMX signal. If the fixture is turned on without any DMX
signal, the fixture will automatically go in to sound-active mode. Available settings
are: " Close" – Shutter flags will close. " Hold" – Fixture will remain at it' s last settings.
" Auto" – Fixture will go into stand-alone mode, running the built-in program. " Music"
– The fixture will go into sound -active mode.
©Elation Professional, Los Angeles Ca. 22
E SPOT LED™
www.ElationLighting.com