Setting Parameters - Argox OS-214 plus User Manual

10. The system assigns the USB port for Label Dr200 (4 inch
model) printer
38

Setting Parameters

After installing the driver, follow the path below to set parameters:
Start → Settings→ Printers→ Label Dr.→ Properties
Parameters include:
Ports Select the IO port to link with the printer. The
port may be USB, parallel (LPT), serial
(COM), network port, or file.
Paper size Select the proper size. If there is no desired
size, select "Custom" to define paper size.
Orientation Set portrait or landscape.
Paper source T/T stands for thermal transfer (ribbon)
(Media type) mode and D/T for direct thermal mode
(without ribbon).
Media choice Set the heat value or darkness from this
field. Darkness values range from 0 to 15.
(Darkness)
This function designates the number of
Copies
printed copies of each page.
More options To use the cutter or peeler function, enter
(Accessories) More Options and select one of the items.
Device options Set print speed. For the OS-214 plus, the
(Speed) speed ranges from 1~ 3 ips.
39