Cargo Area - Volvo XC60 Owner's Manual

07 During your trip

Cargo area

Steel cargo grid*
Your vehicle can be equipped with a steel grid
that helps prevent objects in the cargo area
from moving forward into the passenger com-
partment.
Folding the grid up/down
Grasp the lowering edge of the grid and pull it
rearward/upward, or push it downward/for-
ward.
NOTE
07
If the steel grid is to be used with the
optional cargo area cover, the grid must be
folded down before the cargo area cover is
put in place.
1 Assembly instruction no. 30715972.
*
280
Option/accessory, for more information, see Introduction.
Installing the steel cargo grid
For information about the necessary tools and
procedures for installing/removing the steel
cargo grid, please refer to the assembly
1
instructions that were included when the grid
was purchased.
Cargo area cover*
Use
•
Pull the cover over the cargo and hook it
into the holes in the rear cargo area pillars.
•
To retract (roll up) the cover, release it from
the holes and guide it toward the rear seat
backrest.
I n f o r m a t i o n P r o v i d e d b y :
Installing the cover
1. Press the end piece on one side of the
cargo area cover into the retaining bracket
in the side panel of the cargo area
2. Do the same on the opposite side
3. Press both sides of the cover until they
click into place . The red mark will no
longer be visible.
4. Check that both ends of the cover are
securely locked in place.
Removing the cover
1. Press one of the end pieces of the cover
inward.
2. Pull the cover carefully upward and out-
ward. The other end will release automati-
cally from its retaining bracket.
Folding down the cargo area cover's rear
flap
The cargo area cover's rear flap points hori-
zontally when the cover is retracted (rolled up).
To fold it down:
–
Pull the flap slightly rearward past its sup-
ports and fold it down.
.
.