Volvo XC60 Owner's Manual page 174

04 Driver support
Driver Alert System*
Settings
Settings for Lane Departure Warning can be
made in the menu system by pressing My
Car. Go to Settings Car settings
support systems Lane Departure
Warning.
There are two alternatives:
On at start-up : This selection switches LDW
on each time the engine is started. Otherwise,
04
Symbols and messages in the display
Symbol Message
Lane departure warning ON
departure warning OFF
- Lane Depart Warn Available
- Lane Depart Warn Standby <40
mph Lane Depart Warn Standby
(
<65 km/h
-
Lane Depart Warn Unavailable
*
172
Option/accessory, for more information, see Introduction.
the system will be in the mode that it was in
when the engine was switched off.
Increased sensitivity
Driver
ses the function's sensitivity. Warnings will be
given at an earlier stage and fewer limitations
apply. When this setting is being used, the sys-
tem only needs to monitor lane marker lines on
one side of the vehicle to change status to
Lane Depart Warn Available
Description
/ Lane The function is switched on or off. The text disappears after 5 seconds.
The function is monitoring the road's marker lines.
The function has gone into standby mode because the vehicle's speed is below 40 mph
(65 km/h).
)
The road lacks clear marker lines.
: This selection increa-
.
I n f o r m a t i o n P r o v i d e d b y :