Volvo XC60 Owner's Manual page 228

06 Infotainment
Radio
keypad on the center console to switch to
manual tuning (or to switch back from manual
tuning to the "list of stations" function).
Manual tuning
By default, the list of stations of the strongest
stations in the area will be displayed when you
turn TUNE (see the preceding section, "List of
stations"). While the list of stations is displayed,
press on the center console keypad to
switch to manual tuning, which enables you to
select a frequency from the complete list of all
radio frequencies available on the currently
selected waveband. In other words, in manual
tuning mode, turning TUNE one step will
change from e.g., 93.3 to 93.5, etc.).
To manually tune a station:
1. Press RADIO. Turn TUNE to scroll to the
AM
desired waveband (
06 press OK/MENU or the thumb wheel on
the steering wheel keypad to confirm.
2. Turn TUNE or the thumb wheel to select a
frequency.
226
NOTE
The radio is initially set to automatically
search for stations in the area in which you
are driving (see the preceding section, "List
of stations").
However, if you have switched to manual
tuning (by pressing
the center console while the list of stations
is displayed), the radio will remain in manual
tuning mode the next time it is switched on.
To switch back to "list of stations" mode,
turn TUNE one step (to display the full list of
stations) and press
Please note that if you press
list of stations is not displayed, this will acti-
vate the INFO function.
Storing preset stations
FM1
, , etc.) and
Ten preset stations can be stored for each
waveband (
Stored preset stations are selected using the
buttons on the keypad on the center console.
Manually storing preset stations
1. Tune to a station (see "Selecting a station"
on page 225).
2. Press and hold one of the number key but-
tons.
> The sound will be muted for several sec-
onds and when it returns, the station has
on the keypad on
.
when the
AM , FM1 , etc.).
I n f o r m a t i o n P r o v i d e d b y :
been stored on the number key button
used.
A list of preset stations can be displayed. This
function can be activated/deactivated in AM/
FM mode in FM menu Show presets
AM menu Show presets
Scan
The function automatically searches the cur-
rent waveband for radio stations. When a sta-
tion is found, it is played for several seconds
before scanning is resumed. While the station
is playing it can be stored as a preset in the
usual way (see "Manually storing preset sta-
tions").
–
To start scanning in AM/FM mode, go to
FM menu Scan or in AM menu
Scan.
Stop station scanning by pressing EXIT.
NOTE
Storing a station interrupts the SCAN func-
tion.
Radio text
Some stations transmit information on pro-
gram content, artists, etc. This information can
be shown on the display.
or in