Volvo XC60 Owner's Manual page 164

Hide thumbs Also See for XC60:
Table of Contents

Advertisement

04 Driver support
Collision warning with Full Auto-brake and Pedestrian Detection*
Operation
Settings are made by pressing MY CAR on the
center console control panel and using the
menus displayed.
Activating/deactivating both warning
signals
To switch Collision Warning's audible and vis-
ual signals on or off at the same time, press
MY CAR on the center console control panel
and go to
Settings
Car settings
04
support systems
Collision
Collision Warning is on, the system will perform
a self-test each time the engine is started by
briefly illuminating the warning light. See page
191 for a description of the menu system.
When the engine is switched on, the Collision
Warning setting that was being used when it
was switched off will be the default setting.
NOTE
The auto-brake and pedestrian detection
features are always on, even if the audible
and visual warning signals have been deac-
tivated.
Activating/deactivating the audible
warning signal only
The audible warning signal can be activated/
deactivated by pressing MY CAR on the center
*
162
Option/accessory, for more information, see Introduction.
console control panel and going to
Car settings
Warning sound if risk of
Setting a warning distance
This setting determines the distance at which
the visual and audible warnings are triggered.
Select
Long
CAR on the center console control panel and
going to
Settings
Driver
support systems
Warning. If
Warning
distance.
The warning distance determines the level of
sensitivity used by the system. The warning
distance
Long
Begin by using
too many warnings, try changing to
WARNING
The setting
in situations where traffic is light and
moving at low speeds.
Collision Warning alerts the driver to the
risk of a collision but this function can-
not reduce the driver's reaction time.
For Collision Warning to be as effective
as possible, it is recommended that Dis-
tance Alert be set to 4 or 5, see
page 151.
Settings
Driver support systems
collision.
,
Normal
or
Short
by pressing MY
Car settings
Driver
Collision Warning
provides an earlier warning.
Long
and if the system gives
Normal
Short
should only be used
I n f o r m a t i o n P r o v i d e d b y :
NOTE
When Adaptive Cruise Control is used,
the warning light and signal will be used
by that function, even if the warnings
provided by Collision Warning have
been deactivated by the driver.
In situations where traffic is moving at
considerably different speeds, or if the
vehicle ahead brakes suddenly, warn-
ings may be considered to be late, even
if the setting
Long
Checking settings
The current Collision Warning settings can be
checked by pressing MY CAR on the center
console control panel and going to
.
Car settings
Driver support systems
Collision
Warning.
Limitations
Strong sunlight, reflections, extreme light con-
trasts, the use of sunglasses, or if the driver is
not looking straight ahead may make the visual
warning signal in the windshield difficult to see.
For this reason, always activate the audible
warning signal.
Slippery driving conditions increase braking
distance, which can reduce the system's
has been selected.
Settings

Advertisement

Table of Contents
loading

Table of Contents