Crushed Glass Installation
Three colors of crushed glass are included with this set to allow for different shading options. Each color of
glass comes in a two-portion bag (labeled "A" and "B") to accommodate the differences between the 33 DVI
and Cypress burner.
33DVI: Use one only the "A" portion of one bag (the larger portion).
Cypress: Use both "A" and "B" portions of one bag.
Pour the crushed glass onto the burner in a thin, uniform layer.
WARNING: Make sure the
glass is a maximum 1 layer
thick (NG can be up to 2
layers). If the glass is too thick
it will impair burner
performance and create soot.
WARNING: Make sure the
pilot is not obscured with glass.
Clear away glass, if necessary,
to insure the pilot flame lights
the burner quickly.
Page 9 of 9
33 DVI / Cypress Driftwood Log Set
Installation Instructions
17601633 - 11/16/10
(sku 94500562)
© Travis Industries, Inc.