Outdoor Navigation; Loading Mapsend Topo Charts; Changing Regions - Magellan CrossoverGPS Quick Start Manual

Outdoor Navigation

The Outdoor application provides a basic form of navigation for hiking and camping.
Without loading any external maps (Magellan MapSend Topo) you can create a track, add
waypoints, navigate to a saved waypoint and perform a backtrack (following your track
back to your point of origin). The Magellan CrossoverGPS has 90 meter topographic maps
installed for the continental United States excluding Alaska. With MapSend Topo maps,
you can install 30 meter topographic maps.
.
Outdoor Map without a MapSend Topo
map loaded.
Magellan MapSend Topo maps are available from Magellan at
http://www.magellangps.com/products/software.asp. The Magellan CrossoverGPS is
compatible with MapSend Topo maps that are preloaded on SD cards. (MapSend Topo
products sold on a CD-ROM or DVD are NOT compatible with the Magellan
CrossoverGPS.)

Loading MapSend Topo Charts

1. Install the SD card with the MapSend Topo Chart into the SD card slot on the left
side of the Magellan CrossoverGPS.
2. If the unit is on or after you turn it on, a message will be displayed that maps have
been found on the SD card.
3. Tap Yes.
4. Select the map you want to load.

Changing Regions

1. Access the Outdoor Navigation Menu. (From the Map screen, tap the MENU
button.) NOTE: If you have an active trip or goto you will need to cancel it before
being able to select a region from the SD card.
Outdoor Navigation
Outdoor Map a MapSend Topo map
loaded.
32