Creating A Route To A Nearest Poi; Creating A Route To A Poi From An Upcoming Freeway Exit - Magellan CrossoverGPS Quick Start Manual

Creating a route to a nearest POI

1. From the Main Menu, tap POI.
2. Select the category of the POI. (Select any subcategory if prompted.)
3. Tap Near.
4. Select Current Position, Address, or City Center.
The most common will be Current Position. In this case you could be looking for
the nearest gas station to your current position.
5. A list of POIs for that category nearest to
the criteria you selected in step 4 will be
presented. Tap on the POI you wish to go
to.
6. Once the POI has been selected from the
available list, select the routing method
you want to use and the Magellan
CrossoverGPS will begin calculating the
route.

Creating a route to a POI from an upcoming freeway exit

This feature functions only if you are travelling on a freeway. If you try to access it while
not on a freeway, an alert is displayed indicating that it is not available.
1. From the Main Menu, tap Exit POI.
2. Select the exit you would like the POI displayed for to see all four of the categories
for that exit or select the icon of the category just to see those POIs for that
category for that exit
3. Select a POI from the list of available POIs.
4. Once the POI has been selected, select the routing method you want to use and
the Magellan CrossoverGPS will begin calculating the route.
This function is available whether you are operating on a route or just travelling without a
selected destination as long as you are on a freeway. Please note that if you are travelling
on a route, selecting this will cancel the route and create a new one. You will then need
to redo the route, using Previous Destinations in the address book, to finish the original
route.
Creating Routes
This is a sample list of POIs that meet the
criteria set. The address and phone number is
displayed to help you select the right POI. The
red arrow indicates the approximate direction of
the POI from your current position.
13