Canon PIXMA MX850 series Quick Start Manual page 87

(2) Press the same button as you pressed in step 2.
W
Note
If you pressed the Black button in step 2, a colored original will be sent in black & white.
(3) Repeat the procedure from steps (1) to (2) to scan all pages of the document.
(4) Press the OK button.
The machine starts sending .
• When the document was loaded in the ADF:
The machine scans the document automatically and starts sending.
W
Note
• To cancel sending a fax, press the Stop/Reset button. To cancel sending a fax while it is being
sent, press the Stop/Reset button, then follow the instructions on the LCD.
• If documents remain in the ADF after pressing the Stop/Reset button during scanning,
"Document in ADF. Press OK to discharge document." appears on the LCD. Press the OK
button so that the remaining document is automatically fed out.
• In case the machine was not able to send a fax, such as when the recipient's line was busy,
your machine is equipped with the function to automatically redial the number after a specified
interval. Automatic redialing is enabled by default. See "Automatic Redialing" on page 87.
To cancel automatic redialing, wait until the machine starts redialing, then press the Stop/Reset
button.
• Sending a Fax after Speaking on Telephone
Send a fax manually after speaking on telephone if you want to speak to the recipient before
sending a fax, or if the recipient does not have a fax machine that can receive automatically.
~ Important
• With manual sending, you cannot use the Platen Glass to load documents.
• To speak to the recipient before sending a fax, you need to connect a telephone to your
machine. See "Preparing the Machine for Fax" on page 57 .
• Dialing with using the Hook button
1
Press the Hook button.
2
Use the Numeric buttons to dial the recipient's fax/telephone number.
W
Note
You can also dial using the one-touch speed dial or coded speed dial.
See "Sending a Fax using the Speed Dial" on page 85.
3
Lift the handset of the telephone connecting to the machine, then speak to the
recipient.
W
Note
If you hear a high-pitched signal instead of the recipient's voice, go to step 5.
4
Ask the recipient to operate the recipient's fax machine to receive faxes.
5
When you hear a high-pitched signal, press the Color button for color sending, or
the Black button for black & white sending.
Faxing 83