Canon PIXMA MX850 series Quick Start Manual page 35

2
Load the envelopes.
(1) Load the envelope against the Cover Guide
(the right side of the Paper Support).
Load with the address side facing UP and the
rear flaps DOWN on the left.
Up to 10 envelopes can be loaded at once.
W
Note
Make sure that the Cover Guide is set upright
when you load envelopes in the Rear Tray.
(2) Pinch the Paper Guide and slide it against the
left side of the envelope.
~
Important
Do not slide the Paper Guide too hard. The
envelopes may not be fed properly.
(2)
"--(A)
(A) Printing orientation
(8) Make sure the flaps are folded.
(3) Press the Feed Switch so that the Rear Tray lamp lights up.
W
Note
You can also select the paper source with the printer driver.
For details, refer to the PC Printing Guide on-screen manual.
3
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows®, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh®, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
~
Important
Be sure to set the printer driver setting properly. If you do not, the address may be printed in the
wrong direction.
W
Note
For details on printer driver settings, see "Printing with Windows" on page 47 or "Printing with
Macintosh" on page 48.
Before Using the Machine 31