Paper Does Not Feed From The Paper Source Specified In The Printer Driver - Canon PIXMA MX850 series Quick Start Manual

Cause
Action
Too much paper loaded.
Make sure that the paper stack does not exceed the paper load limit. However,
proper feeding of paper may not be possible at this maximum capacity
depending on the type of paper or environmental conditions (either very high or
low temperature and humidity).
In such cases, reduce the sheets of paper you load at a time to around half of
the paper load limit.
For details on loading paper, see "Loading Paper" on page 26.
Foreign object in the Rear Tray or
Make sure that there are no foreign objects in the Rear Tray or Cassette.
Cassette.
Envelopes not prepared or loaded When printing on envelopes, load them in the machine in portrait orientation. If
properly.
the envelopes are placed in landscape orientation, they will not feed properly.
For details on loading envelopes, see "Loading Envelopes" on page 30.
Inner Cover is not completely closed. Close the Inner Cover completely. Paper does not feed properly if the Inner
Cover is even slightly open.
Paper Does Not Feed from the Paper Source
Specified in the Printer Driver
Cause Action
The paper source is specified in the
data created by an application
software.
When the paper source setting is inconsistent between an application program
and the printer driver, the application software setting takes precedence.
Change the application software setting corresponding to the printer driver
setting, or click Print Options on the Page Setup sheet in the printer driver and
select Disable the paper source setting of the application software on the
Print Options screen.
For the print option setting, refer to the PC Printing Guide on-screen manual.
Troubleshooting
147