Oki OKIOFFICE 1200 Field Engineering Manual page 27

Fusing temperature
1) Warming Up After the initialization of the printer, warming up of the printer starts and the
Heater Lamp turns ON until the temperature of the Heater Roller reaches
approx. 185 °C.
2) Printing When the printer obtains the printing command from its controller, the Heater
Roller is maintained at 185 °C.
After printing, the printer turns to standby mode. The fuser kept at low
temperature.
3) Standby mode The Heater Roller maintained at approx. 100 °C.
4) Sleep mode In this mode, saving the power.
OKIOFFICE 1200:
Temperature
( F) ( C)
392 200
356 180
320 160
Warming up
Power ON
OKIOFFICE 1600:
Temperature
( F) ( C)
401 205
374 190
338 170
Warming up
Power ON
Post card printing only
Printing
Standby mode
Post card printing only
Printing
Standby mode
2-17
Time
Sleep mode
Time
Sleep mode