Back-Up Lamps - Cadillac 2010 SRX Owner's Manual

8. Press a new bulb into the
socket, insert it into the taillamp
assembly and turn the bulb
socket clockwise until it clicks.
9. Reinstall the taillamp assembly
and tighten the screws.
10. Reinstall the taillamp cover by
snapping it into place.
11. Push the push pin to secure
the taillamp cover.

Back-Up Lamps

To replace one of these bulbs:
1. Open the liftgate. See Liftgate
(Manual) on page 1 13 or
Liftgate (Power) on page 1 14.
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release
the taillamp cover (B).
3. Remove the taillamp cover from
the lamp assembly by pulling
rearward from the top to
unfasten from snap tabs.
Vehicle Care
4. Remove the two screws from the
taillamp assembly.
5. Pull the taillamp assembly
straight back to remove.
9-41