Voice Recognition - Cadillac 2010 SRX Owner's Manual

6-52 Infotainment System
Bluetooth

(Voice Recognition)

Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See the cell phone
manufacturers user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
®
using OnStar Hands Free Calling,
if available. Refer to the OnStar
Owner's Guide for more information.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.
A Bluetooth phone with MP3
capability can not be paired to the
vehicle as a phone and an MP3
player at the same time.
Pairing Information:
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
The Bluetooth system links with
the first available paired cell
phone based on the order
shown in the device list.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
Pairing only needs to be
completed once, unless the
pairing information changes or
the phone is deleted.
To link to a different paired phone,
see Linking to a Different Phone
later in this section.
Pairing a Phone
1. Press / . The system
responds with a tone. After the
tone say Hands Free . The
system responds Ready
followed by a tone.
2. Say Bluetooth . The system
responds Bluetooth ready
followed by a tone.
3. Say Pair . The system responds
with instructions and a four digit
PIN number. The PIN number
will be used in Step 4.