Preparing The Remote Control; Using The Remote Control - Panasonic BL-WV10A Setup Manual

Preparing the Remote Control

The remote control included with the BL-WV10A is required for most operations.
Insert the included batteries as shown below.
While pulling the cover
toward you, lift it up.

Using the Remote Control

The remote control's navigator
keys are used to navigate
through the BL-WV10A's on-
screen menus and to select on-
screen items. The [RETURN]
button is used to return to the
previous menu. The [ENTER]
button is used to select a menu
item or parameter.
When using the remote control
with the BL-WV10A, make sure
you aim the remote control
toward the unit's remote control
sensor.
Insert the batteries,
positioning the
poles as indicated.
[ENTER]
Align the cover and
and
press down until it
snaps into place.
Remote control sensor
Navigator
keys
[RETURN]
5