Panasonic BL-WV10A Setup Manual page 10

Quick Setup (Using the BL-WV10A Only)
To use the BL-WV10A with your cameras, you will need to configure the BL-
WV10A and your cameras. The BL-WV10A's Quick Setup utility can help you
configure the devices easily.
1.
After the unit restarts, wait while the Quick Setup utility scans for network and
wireless settings.
• When the BL-WV10A has been configured, "Finished" is displayed and
the buzzer sounds.
• With this connection setup, it is normal for no router or wireless router to
be found.
2.
Wait while the Quick Setup utility restarts the camera, then configures and
registers the camera.
• When the camera has been configured and registered, "Finished" is
displayed next to the camera name ("CAM1") and the buzzer sounds.
10