Disc Information; Disc Handling; Step 1 The Remote Control - Panasonic DMR-E30 Operating Instructions Manual

Disc information

!?
Discs you can use for recording and
play
DVD-RAM DVD-R
4.7 GB/9.4 GB, 12 cm (5z) 4.7 GB for General Ver. 2.0
2.8 GB, 8 cm (3z)
≥This unit is not compatible with:
– 12-cm (5z), 2.6- and 5.2-GB DVD-RAM
– 3.95- and 4.7-GB DVD-R for Authoring
– DVD-RAM not recorded following the Video Recording Standard
– Unfinalized DVD-R recorded on other equipment
≥This unit is compatible with the Content Protection for Record-
able Media (CPRM) system so you can record broadcasts that
allow one copy, such as some CATV broadcasts, onto 4.7 GB/9.4
GB DVD-RAM (these are CPRM compatible). It is not possible to
record onto DVD-R.
≥We recommend using Panasonic discs as they have been con-
firmed to be compatible with this unit. Other discs may not perform
correctly.
≥Do not allow the disc to become dirty or scratched. Fingerprints,
dirt, dust, scratches or deposits of cigarette smoke on the record-
ing surface may make it impossible to use the disc for recording.
DVD-RAM
≥DVD-RAM recorded on this unit may not be compatible with
other DVD players, including some Panasonic players. Con-
sult the manual for the player to determine compatibility with
these DVD-RAM discs.
≥This unit is compatible with both non-cartridge and cartridge
DVD-RAM, but the write-protect tabs on cartridge-type discs give
better protection to your recordings ( page 19).
≥Picture aspect ratios, regular 4:3 or widescreen 16:9, are recorded
as they are received.
≥Discs with programs recorded in PAL already cannot be recorded
on using this unit.
DVD-R
≥In order to play a DVD-R recorded using this machine on
another playback source, the disc must first be finalized
(‹page 34).
≥Once a DVD-R is finalized, it becomes DVD-Video.
≥You can record onto the available space on the disc and perform
editing functions, such as giving titles to discs and programs and
erasing programs before finalizing.
≥You cannot record over parts that have been recorded.
≥It takes about 30 seconds for the unit to complete recording man-
agement information after recording finishes.
≥This unit optimizes the DVD-R for each recording. Optimizing is
carried out when you start recording after inserting the disc or
turning on the unit. Recording onto the disc may become impossi-
ble if optimizing is carried out too many times.
≥Play may be impossible in some cases due the condition of the
recording.
≥The video is recorded in a 4:3 aspect irrespective of the video sig-
nal input.
≥Discs with programs recorded in PAL already cannot be recorded
on using this unit.
8
RQT6559
Play-only discs
DVD-Video Audio CD Video CD
≥The producer of the material can control how DVD-Video and
Video CDs are played. This means that you may not be able to
control play of a disc with some operations described in these
operating instructions. Read the disc's instructions carefully.
≥This unit can play CD-DA (digital audio) and Video CD format
(Video CD Format 2.0 or above), audio CD-R and CD-RW that
have been finalized upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the condi-
tion of the recording.
≥This unit cannot record onto CD-R or CD-RW.
DVD-Video
≥Audio format
Dolby Digital ( page 57)
This unit can play Dolby Digital in stereo (2
channels). Connect an amplifier with a built-
in Dolby Digital decoder to enjoy surround
sound.
DTS Digital Surround ( page 57)
Connect this unit to equipment that has a
DTS decoder to enjoy DVDs with this mark.
Discs that cannot be played
≥DVD-Video with a region number other than "1" or "ALL"
≥Some DVD-RAM ( left)
≥Some DVD-R ( left)
≥PAL discs
≥DVD-ROM
≥DVD-RW
≥DVD-Audio
≥+RW
≥CD-ROM
≥CDV
≥CD-G
≥Photo CD
≥CVD
≥SVCD
≥SACD
≥MV-Disc
≥PD
≥Divx Video Disc, etc.
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due
to a problem with the unit or disc, and accepts no respon-
sibility and offers no compensation for any subsequent
damage caused by such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD
recorder or computer disc drive manufactured by another
company.
≥A disc used as described above and then played again in this
unit.
≥A disc recorded and edited with a DVD recorder or computer
disc drive manufactured by another company is played in this
unit.

Disc handling

Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)
∫ How to hold a disc
Do not touch the recorded surface.
∫ If there is dirt or condensation on the disc
!?
Moisture may condense on discs after they are brought inside
from the cold.
DVD-RAM and DVD-R
Clean only with the DVD-RAM/PD disc cleaner available as an
optional accessory, part number LF-K200DCA1.
Do not use cleaners or cloths for CDs to clean DVD-RAM and
DVD-R.
DVD-Video, CD, Video CD
Wipe with a damp cloth and then wipe dry.
∫ Handling precautions
≥Do not write on the label side with a ball-point pen or other writ-
ing instrument.
≥Do not use record cleaning sprays, benzine, thinner, static elec-
tricity prevention liquids or any other solvent.
≥Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
≥Do not use scratch-proof protectors or covers.
≥Do not use discs printed with label printers available on the mar-
ket.
≥Do not use discs that are badly warped or cracked.
∫ Do not place or store discs in the following
places
≥Locations exposed to direct sunlight
≥Humid or dusty locations
≥Locations directly exposed to a heat vent or heating appliance
1
STEP
The remote control
Batteries
!?
R6, LR6, AA, UM-3
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
[Note]
If you cannot operate the unit or television using the remote con-
trol after changing the batteries, please re-enter the codes
(television page 15, main unit page 50).
Use
!?
Remote control signal sensor
20x
20x
30x
30x
7 m (23 feet) directly
in front of the unit
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.
9
RQT6559