Panasonic BL-WV10A Setup Manual page 15

Quick Setup (Using an Optional BB-HGW700A)
To use the BL-WV10A with your cameras and the BB-HGW700A, you will need to
configure the BL-WV10A and each device. The BL-WV10A's Quick Setup utility
can help you configure the devices easily.
1.
After the unit restarts, wait while the Quick Setup utility scans for network and
wireless settings.
• When the BL-WV10A and BB-HGW700A have been configured,
"Finished" is displayed and the buzzer sounds.
2.
Use an Ethernet cable to connect the camera to one of the LAN jacks on the
BL-WV10A or to one of the LAN jacks on the BB-HGW700A.
Rear panel of
BL-WV10A
LAN jacks
Ethernet cable
Rear panel of BB-HGW700A
Bottom of BL-C30A
Rear panel
of camera
15