Panasonic BL-WV10A Setup Manual page 13

Basic Setup (Using an Optional BB-HGW700A)
After the BL-WV10A starts up for the first time, the [Basic Setup] screen is
displayed. Here you can set the administrator user name and password. For most
installations, other parameters do not need to be changed. For information
regarding Basic Setup settings, see "Setting the User Name and Password" on
page 34 of the Operating Instructions.
1.
Select [Camera Settings], then press [ENTER].
2.
Use the navigator keys to select [Admin. User Name], then press [ENTER].
3.
Enter the administrator user name (6 or more characters and/or digits), the
press [STOP] to save the setting.
• For instructions on entering characters, see "Entering Characters with the
Remote Control" on page 19.
4.
Select [Admin. Password], then press [ENTER].
5.
Enter an administrator password (6 or more characters and/or digits), the
press [STOP] to save the setting.
6.
Press [RETURN] to return to the top menu, use the navigator keys to select
[Finished], then press [ENTER].
13