Table of Contents
Advertisement
Front Panel
Power Switch
Switches the SE-1200 MU power ON / OFF.
Rear Panel
Video IN
The SE-1200 MU is equipped with six video input channels.
Video Input set is comprised of four SDI connectors and two
HDMI ports.
Note: Both HDMI ports support 1080p only.
Video OUT
HDMI 1: Multi-View Outputs
HDMI 2: Output for engineering debugging
SDI 1 / SDI 2: SE-1200 MU is capable of achieving multi-view
monitoring by connecting two multi-view monitors to the
two SDI ports. The two HDMI outputs can be used for
monitoring video in a number of different configurations.
Audio Input
Supports four channels XLR Balanced Audio Input.
Ethernet Ports
For connection of the Main Unit to the PC such that the SE-
1200 MU can be remotely controlled on a graphical user
interface.
RS-232
For remote control interface (TBD).
TALLY Output
The SE-2200 MU Tally Output Port provides tri-color tally
information (Red, Yellow and Green); Red indicates On-Air
and Yellow indicates next camera source.
DC IN
Connect the supplied 12V / 19W PSU to this socket. The
connection can be secured by screwing the outer fastening
ring of the DC In plug to the socket.
Grounding Terminal
When connecting this unit to any other component, make
sure that it is properly grounded by connecting this terminal
to an appropriate point. When connecting, use the socket
and be sure to use wire with a cross-sectional area of at least
1.0 mm 2 .
7
Hide quick links:
Advertisement
Table of Contents
