Sources Panel; Aux Bus; Program; Preset - Datavideo SE-1200MU Quick Start Manual

Sources Panel

This panel consists of three identical rows of buttons and is used to assign sources or select images for Program or
Preset outputs. The buttons are labelled from left to right as Black, sources 1 to 6, and Matte.

AUX BUS

This row of buttons is typically used to assign sources in the presence of an Auxiliary Monitor, as well as for setup
of the Linear, Chroma and Luma Keyer functions.

PROGRAM

This row of buttons is typically used to select sources or images for the SE-1200 MU main Program output. The
currently selected source is being sent to the Program output will be backlit Red. Simple cuts between sources can
be performed on this row by clicking on the source number required for the next shot.

PRESET

This row of buttons is typically used to select sources or images for the SE-1200 MU Preview output. The currently
selected source will be backlit Green. The selected button on the Preset row will change from Green to Yellow
during Preview-Program transitioning using T-Bar.
57