Wipe Shade - Datavideo SE-1200MU Quick Start Manual

Color Palette
The Color Palette allows selection of a color for the Wipe Border Matte. Click on the Color Palette to show the
currently selected color which is displayed in the square box with the RGB values calculated on the right.
Luma, Sat and Hue values
The color of the Wipe Border Matte can also be configured by adjusting the Luma, Sat and Hue values. These
values can be fine-tuned using the Function Dials located just below the Screen.
Source Control
Instead of using a color for the Wipe Border, a video source or a still picture could also be used. As the wipe moves
along the screen, the image source is partially revealed across the path of the wipe.
Clicking on "Source" displays a list of 8 options for the Wipe Border source. Use the Up/Down Arrows to scroll
through the list and then click on the desired source. Available options are Normal (Single Color Border), Shaded
(Dual Color Border), or an Input from 1 to 6.

Wipe Shade

In order to achieve Wipe Shade effect, the Shaded Border (Dual Color) must be first configured by assigning the
Wipe Source value (refer to the above Source Control section). The Wipe Shade parameters and the values are
currently shown along the bottom of the display below.
The Wipe Shade Menu allows configuration of the Wipe Shade Matte.
28