Chroma Key Quick Setup - Datavideo SE-1200MU Quick Start Manual

Chroma Key Quick Setup

Step 1: Choose the desired Keyer channel. In our
example, click Key 1 button on the AUX BUSES panel.
Step 2: Choose the type of Keyer you want to use.
In our example, click Chroma button on the KEYER
CONTROLS panel.
Step 3: Select the foreground video source to be
keyed. In our example, we want to use the green
screen source connected to Input 5, so click button 5
of the Aux Bus Row such that it is backlit Green.
Step 4: To turn the keying effect on, click On button
so that it is backlit green. In our example, you will
now see the selected source button 5 on the Aux Bus
Row changes so that it is now backlit Red.
Step 5: Make some initial adjustments to the key.
Click Chroma button on the MENU SELECT panel.
Choose Quick Setup on the Yellow menu bar located
on the left of the Screen.
The parameters along the bottom of the Screen will
now allow you to quickly calibrate for a basic green
or blue key.
You can then move on to fine tune the key using
Chroma Key Ctrl and Color Spill options.
42