Setting Gpi Out; Setting Streamer - Datavideo SE-1200MU Quick Start Manual

Setting GPI Out

Click GPI Out to configure GPI settings
Click "Enable" to turn ON/OFF GPI Out and configure other GPI-related settings listed below:

Mode: Pulse/Level

Width

Source: Input 1-6

Delay

Setting Streamer

Click "Streamer" to configure the stream settings; the user can set the Stream Size (Full/Half/Quarter/Sixth) in this
option. Click Stream Start to start the stream and click Stream Stop to stop the stream.
Video Streamer Outputs
The SE-1200 MU is capable of live video streaming to the Internet and steps to launch a successful online video
streaming are outlined as follows.
1. Click "Stream Start" as depicted below to enable streaming function
21