Miele TX2070 Operating Instructions Manual page 66

Problem solving guide
Problem
The Inlet/Drain and
Rinse aid indicator
lights are flashing at the
same time.
Fault number  ap‐
pears in the display.
Fault :
The drain pump is still
running, even with the
door open.
Fault :
66
Possible cause and remedy
There may be a technical fault.
 Switch the dishwasher off with the  button.
 Switch the dishwasher back on after a few sec‐
onds.
 Select the programme you want to use.
 Press the Start button.
If the indicator lights flash again, there is a technical
fault.
 Call Miele.
The Waterproof system has reacted.
 Turn off the tap.
 Call Miele.
A fault has occurred in the circulation pump.
 Switch the dishwasher off for at least 30 seconds
using the  button.
 Switch the dishwasher back on.
If the fault message appears again, there is a techni‐
cal fault.
 Call Miele.