With the help of the following guide, minor faults in the performance of the appli‐
ance, some of which may result from incorrect operation, can be put right without
contacting Miele. This will save time and money.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating in‐
structions.
Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and na‐
tional safety regulations. The manufacturer cannot be held liable for unauthor‐
ised work.
Technical problems
Problem
The Start indicator light
does not flash after the
dishwasher has been
switched on using the
button.
The dishwasher stops
during a programme.
Possible cause and remedy
The appliance is not plugged in.
Insert the plug and switch on at the socket.
The mains fuse has tripped.
Reset or replace the fuse (see data plate for mini‐
mum fuse rating).
The mains fuse has tripped.
Reset or replace the fuse (see data plate for mini‐
mum fuse rating).
If the mains fuse trips again, call Miele.
Problem solving guide
65