Related Manuals for Miele Freestanding coffee machine
Summary of Contents for Miele Freestanding coffee machine
- Page 1 Operating instructions Freestanding coffee machine To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr. 09 732 150...
-
Page 2: Packaging Material / Disposal Of Old Machine
Please kept in case the machine ever needs to do not therefore dispose of it with your be returned to Miele for servicing. household waste. Please dispose of it at your local community waste collection / recycling centre. -
Page 3: Table Of Contents
Contents Packaging material / Disposal of old machine ......2 Warning and Safety instructions ........6 Guide to the machine . - Page 4 Contents Profiles ............36 Calling up a profile.
- Page 5 Contents Descaling ............57 Problem solving guide .
-
Page 6: Warning And Safety Instructions
They contain important notes on setting it up, as well as on its safety, operation and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. Keep the instructions in a safe place and pass them along to any future owner. - Page 7 Warning and Safety instructions Safety with children There is a danger of burning and scalding from the coffee and hot water dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.
- Page 8 Warning and Safety instructions Technical safety A damaged coffee machine is dangerous. Check it for any visible damage before setting it up. Never attempt to use a damaged coffee machine. Before connecting the coffee machine to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply.
- Page 9 Faulty components must only be replaced by genuine Miele Original spare parts. The manufacturer can only guarantee the safety of the machine when Miele replacement parts are used. The machine must be disconnected from the electricity supply during repair work.
- Page 10 Warning and Safety instructions Correct use The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. Please note: – Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. –...
- Page 11 Descale the coffee machine regularly using the appropriate number of Miele descaling tablets for the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from...
- Page 12 Warning and Safety instructions Degrease the brew unit regularly with Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Used coffee grounds should be disposed of with the organic rubbish or on the compost heap.
-
Page 13: Guide To The Machine
Guide to the machine a Master switch j Central spout with cappuccinatore b Hot water spout k Park position for milk pipework (behind the service panel) c Controls and display l Drip tray with lid and waste container d Cup heating m Milk tube aperture e Water container n Holder for drip tray cover and drip... -
Page 14: Controls And Display
Controls and display a On/Off - For switching the coffee machine on and off b Drink sensors For making . Espresso / Coffee H Cappuccino k Latte macchiato c Display Shows information about the current action or status d Back # For returning to the previous menu, cancelling unwanted actions e Arrow sensors Y X... -
Page 15: Accessories
Accessories The following accessories are included Miele also offers a range of optional with your coffee machine depending accessories, as well as cleaning and on model: conditioning products for your coffee machine. – Measuring scoop for ground coffee – Microfibre cloth for removing finger marks and light –... -
Page 16: Before Using For The First Time
Tip: To get the best out of your coffee machine and to set it up for your specific requirements, please continue to work through these operating instructions. When you switch the machine on for the first time the following message will appear in the display: "Miele - Willkommen". -
Page 17: Water Hardness
Before using for the first time Water hardness Measuring water hardness The water hardness level indicates how You can measure the water hardness much calcium is dissolved in the water. yourself using the enclosed test strip. The higher the calcium content, the Alternatively, your local water authority harder the water, and the harder the will be able to tell you the hardness of... -
Page 18: Operation
^ Touch the X and Y arrow sensors You are in the drinks menu when the until the option you want is display shows: highlighted. To confirm your choice: Miele ^ Touch OK. Select drink Exiting a menu or cancelling an action To exit the current menu: To make a drink, touch one of the ^ Touch #. -
Page 19: Filling The Water Container
Filling the water container The quality of the water plays an important part in the quality of the coffee. Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. -
Page 20: Filling The Coffee Bean Container
Filling the coffee bean container Fill the coffee bean container with roasted coffee beans if you want to use freshly ground coffee beans for each cup of espresso or coffee. Alternatively, you can make coffee or espresso with ready ground coffee (see "Making coffee or espresso using ready ground coffee"). -
Page 21: Switching On And Off
Switching on and off Switching on Switching off ^ Touch the On/Off sensor -. Switch the master switch on the left hand side of the machine to the "I" If the coffee machine has been used for position. making a drink it will rinse itself before ^ Touch the On/Off sensor -. -
Page 22: Pre-Heating Cups (Cup Heating)
Pre-heating cups (cup heating) To switch cup heating on or off Cups should always be pre-heated to allow the flavour of the coffee to ^ Touch X. develop and be retained. ^ Select "Cup heating" and touch OK. The smaller the volume of the coffee/espresso and the thicker the ^ Select the required option and touch cup, the more important it is to pre-heat... -
Page 23: Adjusting The Central Spout To The Correct Cup Height
Adjusting the central spout to the correct cup height You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. -
Page 24: Making Drinks
Making drinks Espresso or coffee To make two portions You can dispense two portions into one cup or dispense two portions into two cups at the same time. To fill two cups at the same time: ^ Place a cup under the central spout. ^ Touch the sensor for the drink you want: ^ Place a cup under each coffee spout. -
Page 25: Cancelling Preparation
Making drinks Cancelling preparation Making coffee with ground coffee To cancel preparation: To make espresso or coffee using ^ Touch the drinks sensor which is lit ready ground coffee, add a portion of up, or x for drinks from "Further ground coffee to the ground coffee programmes"... -
Page 26: Adding Ready Ground Coffee
Making drinks Adding ready ground coffee Making coffee with ready ground coffee Use the measuring scoop supplied so that the correct amount is used. If you want to make a drink with ready ground coffee: Do not add more than one level ^ Select "Yes"... -
Page 27: Drinks With Milk
Making drinks Drinks with milk Stainless steel milk flask The stainless steel flask keeps milk cool Caution. Danger of burning and for longer. Good milk froth can only be scalding from the central spout. made with cold milk (< 13°C). Liquids and steam dispensed from the spouts will be very hot. - Page 28 Making drinks ^ Place the milk flask on the right hand ^ Place a container with sufficient milk side of the coffee machine. Connect beside the coffee machine on the the other end of the milk tube to the right hand side. central spout.
-
Page 29: Preparing Hot Water
Making drinks Preparing hot water Making drinks using a profile You can enter individual profiles to Danger of burning and scalding cater for different tastes and on the hot water spout. The water preferences (see "Profiles"). dispensed is very hot. If you have already created your own profile, you can select this to make a drink according to your own tastes. -
Page 30: Coffee The Way You Like It
Coffee the way you like it You can customise your coffee machine to suit the type of coffee you To avoid damaging the grinder, are using. The "Parameters" menu , please note the following: allows you to adjust the amount of coffee that is ground, set the brew Only adjust the grinder one setting temperature and deselect the... -
Page 31: Displaying And Changing The Parameters Of A Drink
Coffee the way you like it ^ Use the arrow sensors to change the Displaying and changing the amount. parameters of a drink Then touch OK. ^ Touch ,. The setting is now saved. The , sensor will light up. ^ Select the drink you want and touch Brew temperature The ideal brewing temperature will... -
Page 32: Pre-Brewing
Coffee the way you like it Pre-brewing When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee. -
Page 33: Portion Size
Portion size The flavour of the coffee produced Tip: To cancel changing the portion depends not just on the type of coffee size, touch the drinks sensor which is lit up, or touch x for "Further used, but also on the amount of water used. - Page 34 Portion size Portion sizes for cappuccino and Portion sizes for caffé latte, hot milk latte macchiato and milk froth ^ Place a suitable container ^ Place a suitable container underneath the central spout. underneath the central spout. ^ Touch H or k until the ingredients for ^ Touch ,.
-
Page 35: Changing Portion Sizes In The "Parameters" Menu
Portion size Changing portion sizes in the Changing the portion size for "Parameters" menu , different profiles ^ Touch ,. You can set the portion size for individual drinks for each profile. ^ Select the drink you want and touch ^ Touch {. -
Page 36: Profiles
If you have allocated a profile in TIP If you make a mistake, select the # addition to the Miele standard profile, symbol to delete the last character. you have the following options: When you have finished making your –... -
Page 37: Select Profile
Miele standard profile. to the standard Miele profile. The standard Miele profile cannot be ^ Touch "Select profile" and touch OK deleted. ^ Select the profile you want and touch ^ Select "Delete profile"... -
Page 38: Changing A Profile
Miele standard profile automatically after each drink is dispensed, so that the Miele profile is always active when the machine is switched on or so that it retains the most recently selected profile. -
Page 39: Settings
Settings Changing and saving settings You can use the "Settings" menu to customise the coffee machine to suit ^ Touch X. your individual requirements. ^ Select the required setting with the arrow sensors and touch OK. Calling up the "Settings" menu ^ Use the arrow sensors to highlight ^ Touch X. -
Page 40: Overview Of Available Settings
Settings Overview of available settings The factory setting for each option is shown in bold. Option Available settings Language deutsch, english and other languages Country Time Clock format 12 h / 24 h Timer Switch on at / Switch off after (1:00) / Switch off at Activate Switch on at (Yes / No) / Switch off at (Yes / No) Eco mode... -
Page 41: Language
Settings Language Timer You can select a language and country The timer offers the following options: for all display texts. The coffee machine Tip: If you select the wrong language – switches on at a particular time, e.g. by mistake, you can find the in the morning for breakfast ("Switch "Language"... -
Page 42: Eco Mode
Settings Eco mode The programmed times will, however, remain in memory and will be The Eco mode is an energy-saving reactivated after manually switching the mode. machine on again. If Eco mode is switched on, the coffee Switch off at machine heats up anew before each drink preparation, making preparation Use the arrow sensors to set the hours... -
Page 43: Info (Display Information)
Settings Info (display information) Water hardness The "Info" option allows you to see how See "Setting up and using the coffee many portions of each drink have been machine" for information about water made. hardness. You can also see whether more than 50 Display brightness portions can be dispensed before the machine needs to be descaled ("No. -
Page 44: Factory Default
Please refer to the "Overview of The coffee machine can be presented available settings" chart for the factory in Miele galleries or stores with the settings which are shown in bold. "Showroom programme". The machine The following settings will not be... -
Page 45: Cleaning And Care
Cleaning and care Quick guide Clean the coffee machine regularly to avoid a build-up of bacteria. Recommended frequency What do I have to clean / maintain? Daily Clean the water container (before you turn the coffee machine Clean the waste container off) Clean the drip tray and grille Clean the stainless steel milk flask... -
Page 46: Rinsing The Machine
Cleaning and care Rinsing the machine Danger of burning and scalding After a coffee has been dispensed, the on hot components or by hot liquids. machine is rinsed before it switches off. This removes any residual coffee Always allow the coffee machine to grounds. -
Page 47: Milk Pipework
"Clean milk pipework" ^ Select "Maintenance" and touch OK maintenance programme together ^ Select "Rinse milk pipework" and Miele cleaning agent for milk touch OK. pipework. ^ When prompted, place the end of the milk tube into the right-hand aperture in the drip tray. - Page 48 The cleaning process is finished when rinsing has finished. Making up the cleaning solution The cleaning agent for milk pipework has been specially developed for Miele coffee machines. You can purchase it from Miele or online at www.miele-shop.com (depending on country).
-
Page 49: Central Spout With Cappuccinatore
Cleaning and care Central spout with cappuccinatore Clean the central spout cover by hand only using warm water and a little washing-up liquid. All other parts are dishwasher safe. ^ Twist upper section a with the holder for the milk pipework and pull it off. Then pull the Y-shaped piece b off. -
Page 50: Milk Flask
Cleaning and care Milk flask If the milk pipe is blocked, clean it under running water with the brush The milk flask should be taken apart supplied. and cleaned every day. ^ Insert the brush in the tube and move ^ Clean all parts by hand only using it back and forth as far as it will go hot water and a little washing-up... -
Page 51: Clean The Water Container
Cleaning and care Clean the water container Drip tray cover ^ Remove the drip tray cover from the Clean the water container lid by hand only using hot water and a little drip tray. washing-up liquid. ^ The drip tray cover can be cleaned in Change the water every day to prevent the dishwasher, or by hand using a build-up of bacteria. -
Page 52: Drip Tray And Waste Container
Cleaning and care ^ Push the central spout up as far as it Drip tray and waste container will go. Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. -
Page 53: Bean Container And Ground Coffee Chute
Cleaning and care Bean container and ground Brew unit coffee chute Disconnect the coffee machine from the power supply before Disconnect the coffee machine cleaning. from the power supply before cleaning. Clean the brew unit by hand only Tip: Use a vacuum cleaner to remove using warm water. - Page 54 Cleaning and care ^ Push the brew unit back into the If you cannot remove the brew unit or can only do so with difficulty, the brew coffee machine, making sure it goes unit is not in the correct position (See in straight.
-
Page 55: Degreasing The Brew Unit
The cleaning tablets for degreasing the brew unit have been specially developed for Miele coffee machines. You can purchase the Original Miele cleaning tablets at ^ Place a cleaning tablet into the coffee www.miele-shop.com (depending on country) or from Miele. -
Page 56: Housing
^ Clean the front of the machine with a solution of warm water and a little washing-up liquid applied with a soft sponge. Then dry all parts with a soft cloth. Tip: You can also clean the appliance front with the Original Miele all purpose microfibre cloth. -
Page 57: Descaling
They can be portions until appliance needs purchased at www.miele-shop.com descaling: 50" appears in the display. (depending on country) or from Miele. Each time a drink is prepared, the coffee machine displays the number of You will need 1 descaling tablet to portions remaining until descaling must descale the machine. -
Page 58: Descaling When Not Prompted By A Message
Descaling ^ Place 1 descaling tablet in the water. Descaling when not prompted by a message: Ensure that you adhere to the mixing ^ Touch x. ratio for the descaling tablets. It is important that you do not fill the ^ Select "Maintenance"... -
Page 59: Problem Solving Guide
Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. If you can't remedy the problem yourself, please call Miele. Please note that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions. - Page 60 Problem solving guide Message Possible cause and remedy "Too much ground There is too much ready ground coffee in the ground coffee coffee" chute. If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee. The ground coffee will be directed into the waste container and the fault message will appear in the display.
- Page 61 Problem solving guide Message Possible cause and remedy The brew unit cannot be positioned correctly. ^ Switch the machine off with the On/Off - sensor. "Check the brew ^ Remove and clean the brew unit (see "Cleaning and care – unit"...
- Page 62 The main fuse has tripped because of a problem with the coffee machine, the electricity supply or another appliance. ^ Switch off at the wall socket and unplug it. ^ Contact a qualified electrician or Miele. The coffee The switch-off time programmed using the timer has been machine switches reached.
- Page 63 Problem solving guide Problem Possible cause and remedy The sensors do There is an internal fault. ^ Disconnect the machine from the power supply by not react to touch. The appliance removing the plug from the socket. cannot be operated. The coffee The system lock has been activated.
- Page 64 Problem solving guide Problem Possible cause and remedy Neither milk nor The milk pipework is blocked. ^ Clean the central spout, taking particular care to clean the milk froth comes out of the central cappuccinatore and milk pipes carefully with the cleaning spout.
- Page 65 Problem solving guide Problem Possible cause and remedy Drink dispensing Condensate may have built up on the control panel and starts even though accidentally started the process. a sensor has not ^ Wipe any condensate off with a soft cloth. been touched.
- Page 66 Problem solving guide Problem Possible cause and remedy The central spout has a blockage. Coffee or Espresso is not ^ Clean the coffee pipework (see "Cleaning and care - flowing out of the Rinsing the machine). central spout, or ^ If, having rinsed the machine, Espresso or coffee still coffee is only cannot be dispensed or only flows out of one spout, being dispensed...
- Page 67 ^ Fill the container with fresh beans. noise than usual. There may be stones in amongst the coffee beans. ^ Switch the coffee machine off immediately. Call Miele. Espresso or coffee The coffee is too coarsely ground. ^ Set the grinder to a finer setting (see "Setting the coffee flows into the cup too quickly.
- Page 68 Problem solving guide Problem Possible cause and remedy The crema on the The grinder setting is not correct. ^ Set the grinder to a finer or coarser setting (see "Setting coffee or espresso is not as it should the coffee grinder"). The brewing temperature is too high for this type of coffee.
-
Page 69: Transporting The Machine
Transporting the machine If you are not going to use the coffee machine for an extended period of Caution. Danger of burning and time, e.g. whilst on holiday, or if it scalding from hot steam coming out needs to be moved, a number of of the hot water spout. -
Page 70: After Sales / Guarantee
– your Miele Dealer – Miele Contact details for Miele are given at the end of this booklet. N.B. A call-out charge will be applied to ser- vice visits where the problem could have been resolved as described in these instructions. -
Page 71: Saving Energy
Saving energy If the default settings for "Eco mode" or Switch the machine off with the the "Timer" have been altered, energy master switch and at the wall socket. consumption will increase. If the coffee machine is not going to be The message "This setting uses more used for a longer period of time, e.g. -
Page 72: Electrical Connection
Electrical connection All electrical work should be carried Do not connect the machine to an out by a suitably qualified and inverter such as those used with an competent person only, in strict autonomous energy source e.g. Solar accordance with current national and power. -
Page 73: Installation
Installation Please observe the following installation If the machine is installed in a niche, instructions: the niche must provide the following minimum dimensions: Danger of overheating. Please ensure that there is adequate Height 508 mm ventilation around the machine. Width 450 mm Do not cover the machine with tea towels or similar objects whilst it is in... -
Page 74: Appliance Dimensions
Appliance dimensions... -
Page 75: Technical Data
Technical data Current draw in standby mode < 0.5 Watt (default setting) Pump pressure: max. 15 bar Through-flow heater: 1 stainless steel thermo block Appliance dimensions (W x H x 251 x 359 x 427 mm Net weight 9,9 kg Connection cable length: 140 cm Water container capacity:... - Page 80 CM 6300 en - GB M.-Nr. 09 732 150 / 03...