Operation; Switching On, Adjusting The Flame And Switching Off - Miele CS 1018 Operating And Installation Instructions

Operation

Switching on, adjusting the
flame and switching off
The control knob is used to ignite the
burner and regulate the strength of the
flame.
ß The gas supply is turned off
ß Ignition setting
& Stongest flame
Both the inner and the outer burners
operate on full output.
& (2x) Strong flame
The outer burner operates on low
output and the inner burner on high
output.
/ Weak flame
The outer burner is switched off,
The inner burner operates on high
output.
/ Weak flame
The outer burner is switched off,
The inner burner operates on low
output.
22
The burner can only be switched on
by pressing in the control and
turning it anti-clockwise. It is
switched off by turning the control
clockwise. The outer flame ring can
only be switched on and off by
pressing down on the control and
turning it in the appropriate
direction.
The following will cause damage to
the appliance:
- Switching on the burner without
pressing the control down,
- Switching the burner on by
turning the control clockwise,
- Switching the outer flame ring
on or off without pressing the
control down,
- Switching the burner off by
turning the control
anti-clockwise.
The manufacturer will not accept
liability for any damaging resulting
from incorrect operation.